Daewoo IC Forklifts Anaheim

Inspect a Forklift

OSHA and HRSDC report that more than 10,000 workplace injuries connected to fork lifts happen every year. Driver error is the reason for many of these accidents. Lack of appropriate equipment check and maintenance causes many others. Forklift maintenance and operation is not only the reason for personal injuries, but also of property damage. Forklifts could damage overhead pipes, sprinklers and building structures, and other machines when utilized incorrectly. The following day by day inspections must be performed so as to reduce the chance of forklift accidents.



Prior to inspecting various fluid levels turn off the engine. Inspect these fluids: hydraulic oil, fuel, engine oil, coolant and brake fluid. The tires also need to be checked for indications of wear and tear. Check the air pressure in the tires. Check the condition of the forks. The load backrest need to be securely attached. Do a visual inspection of the top-clip retaining pin and heel. After that carry out an inspection of the mast chains, hydraulic hoses, stops and cables. Make certain that the overhead and finger guards are attached securely.



The LP powered forklift has propane tanks that have to be checked for rust, corrosion or damage. The battery's charge and electrolyte levels have to be tested every so often. Seat belts need to be checked for wear and tear. Check to make sure the owner's guidebook is kept on-board the forklift in a storage compartment. Test the seat belt to make sure the latches are secure. Test the hood latch to make certain that it is functioning as it should.



To make certain there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate immediately. Check the accelerator and the steering controls. The service brake and the parking break must be properly working.



To ensure proper functioning in both reverse and forward, the tilt control and drive control should be inspected. The functioning of the hoist, the lowering control and attachment control requires periodic checking. Check the lights and horn. Afterward check the heater, defroster and wipers to make sure they are working well. Check each and every gauge to ascertain that it is reading within functional limits.

• Yale Stand Up Forklift Anaheim
  A forklift to be a successful model should be built powerful to last the working conditions for many hours of use. It has to be able to move loads effectively and quickly too. The machinery... More
• Toyota Dual Fuel Forklift Anaheim
  Sakichi Toyoda was the first founder of the Toyota Industries Corporation or TICO during the year 1926. TICO has expanded the scope of its business domains since the companies inception to promote diversification, like logistic... More
• Comansa Tower Cranes Anaheim
  Since 2011, the Linden Comansa company has offered its clients the LC 1600 series tower cranes. This series includes the models: 16 LC 185, 16 LC 260 and 16 LC 220. These units are available... More
• Yale Outdoor Forklift Anaheim
  Reach Assembly & Carriage Both the carriage and the reach assembly receive lots of stress throughout a typical work shift. In order to make sure that the truck keeps production levels high, high durability of... More
• Mitsubishi IC Forklifts Anaheim
  The forklift usage all around the world has grown in insurmountable measures in regards to the warehousing and manufacturing industries. A forklift is a powered industrial truck utilized for lifting and transporting items. The equipment... More